Philips HP L1530R Service Manual page 78

78 HP L1530R
Go to cover page
Electrical defect intensity shall be evaluated using a shade gauge that
covers 2% and 5% of the clear sheet background. Bright spot defects
visible through the 2% shade are to be considered high level defects;
those visible through the 5% shade are considered low level defects.
Unless otherwise specified, optical defects whose length L is greater
than four times the width W, that is L > 4W, shall be considered as
linear defects. Defects whose length is less than four times the width
(L < 4W) shall be considered as spot defects. All gray shade testing
will be based on Shades 1, 12, and 16 for Black/White/Red/Green/Blue
(from a base of 16 gray shades, where 16 is maximum bright and 1 is
minimum bright). A high level dot cannot be adjacent to any other dots.
11.0 Audio
Amplifier section :
Output power : 2 x 2Wrms into 16 Ohm
Input sensitivity : 530mVrms(1.5Vpp)
Total Harmonic Distortion: limited to 5% at 2.0 W at 1K Hz
Frequency range: 100Hz - 20KHz
Loudspeaker section :
Rated input
Max. input
Impedance
Sensitivity(minimum)
15 inch LCD Monitor
TYPE
BRAND : HP L1530
2004-02-11
Jacky Lee
GENERAL PRODUCT SPECIFICATION(Continued)
NOTES:
2.0W
3.0W
16 Ohm+/- 15%
75 dB +/-3 dB (at 1W/1m at 1KHz)
: AJ6B5M/02
2004-02-11
8639 000 15371
590 24
28