Philips HP L1530R Service Manual page 17

2.6 Switch light probe to Viewing position.
2.7 Move the Lens barrel forward or backward to get clear image as
shown in Fig. 4
2.8 Switch light probe to Measuring position. It should be able to
indicate colour value on the CA-110.
2.9 Press Menu buttons to select R G B of 9300 and 6500.
Increase / decrease value by press Plus or Minus buttons until the
1931 CIE chromaticity ( x, y ) as below.
Alignment hits:
R for x value , G for y value, B for Y value on the colour analyzer.
3. NVRAM(24C16) Default Values:
Sub_Bri: 185 255
Sub_Con: 100 127 154
VCOM: 152
4. Factory Reset:
After finishing all the adjustment, select Factory Reset function to
recall:
Do an automatic Auto-Adjustment
Set Brightness = 90
Set Contrast = 80
Set Color = 6500K-sRGB
Set Custom Color (R.G.B) = 100
Set OSD Transparency = 0
To leave factory mode by restart the monitor.
5. Main Menu Factory Default Values:
The OSD shall have the following factory default values:
Language = English
OSD Cotrol:
Horizontal OSD position = 50
Vertical OSD position = 50
OSD timeout = 30s
Management:
Power Saver = ON
Power On Recall = ON
Mode display = OFF
Sleep Timer = OFF
Menu = BASIC
Display Adjustment
Remark:
How to enter aging mode?
1. Disconnect video cable, only connect mains cord..
2. Hold "Menu" and "Plus" key simultaneously, then power On
monitor until aging mode appear.
25
HP l1530R HP L2025
17 7
Go to cover page