Philips HP L1530R Service Manual page 70

70 HP L1530R
Go to cover page
3.5
STATUS
Power On
H-off V-on
H-on V-off
Off
3.6
3.6.1
3.6.2
4.0
4.1
(1) Input signal: As defined in 3.3, 1024 x 768/60Hz non-interlaced
(2) Luminance setting: controls to be set to 200 nits with full screen
(1) Warm up: more than 30 minutes after power on with signal
(4) Ambient light: 400 -- 600 lux.
15 inch LCD Monitor
TYPE
BRAND : HP L1530
2004-02-11
Jacky Lee
GENERAL PRODUCT SPECIFICATION(Continued)
Power management
The power consumption and the status indication of the set with
power management function are as follows,
Horizontal Vertical
Pulse Pulse
No Pulse Pulse
Pulse No Pulse
No Pulse No Pulse
According to VESA power saving signal. TCO99 power
saving requirement
EPA energy star requirement
(Power Switch Off)
For digital input power consumption is less 2W
(In non-DMPM recoverable off mode)
Display identification
In accordance with VESA Display Channel Standard V1.0 and
having DDC-2B capability.
In accordance with DVI requirement (DDWG digital Visual
Interface revision 1.0) use DDC-2B and EDID 3.0 structure 2.0
Visual characteristics
Test conditions
Unless otherwise specified, this specification is defined under
the following conditions.
mode, signal sources must have 75 ohm output impedance.
70 % duty cycle white signal
supplied.
: AJ6B5M/02
2004-02-11
Power Spec LED
< 35 W Green (with Audio)
< 2 W Amber (with Audio)
< 2 W Amber (with Audio)
< 2 W Amber (with Audio)
8639 000 15371
590
28
16