Philips HP L1530R Service Manual page 76

76 HP L1530R
Go to cover page
7.0
7.1.
8.0
8.1
9.0
10.0
15 inch LCD Monitor
TYPE
BRAND : HP L1530
2004-02-11
Jacky Lee
GENERAL PRODUCT SPECIFICATION(Continued)
Reliability
Mean Time Between Failures
System MTBF (Excluding the LCD panel and CCFL): 80,000 hrs
CCFL MTBF: 30,000 hrs (50% of original brightness)
Quality assurance requirements
Acceptance test
According to MIL-STD-105D
AQL: 0.65 (major)
2.50 (minor)
(Please also refer to annual quality agreement)
Customer acceptance criteria: UAW0377/00
Serviceability
The serviceability of this monitor should fulfill the requirements,
which are prescribed in
with the check list UAT-0361.
Panel Defect Limits
Both of HP & Philips agree to follow up panel specification as
inspection condition in business kick off stage, if any deviation
between SHT590 and customer specification, should follow up
panel specification.
Table 14 lists the countable and rejectable sizes for each type of
commonly found defects. Defects within the countable size are
allowed; however, the total number of countable defects shall not
exceed the maximum number of all countable defects noted in the
table. Any defect with dimensions greater than the countable defect
shall be sufficient cause for rejecting the display. The symbols
used are: D = Diameter, L = Length (longest dimension), W = Width
(perpendicular to the length), N = Number or Count, Spot =
Contamination, S = Separation from Edge to Edge, Dot = Subpixel
stuck on/off (electrical).
: AJ6B5M/02
2004-02-11
Control II level
UAW-0346 and must be checked
8639 000 15371
590 22
28