Philips HP L1530R Service Manual page 24

24
HP L1530R
Go to cover page
Re-programming Digital DDC IC
Step 1:Connecting all cables and alignment box as shown in
Fig. 31.
Fig.31
Step 2: Initialize alignment box
(Shortcut of EDID301.EXE on Windows Wallpaper already.) 4.6
4.6
Double click EDID301 icon (as shown in Fig. 32) which is
on the screen of Windows Wallpaper.
Bring up main menu of EDID301 as shown in Fig. 33. 4.6
Fig.32
4.6
Step 3: Read DDC data from monitor
1. Click icon from the tool bar to bring up the Channels
Configuration Setup windows as shown in Fig. 34.
I
2. Select the DDC2B as the communication channel.
and "Enable Factory mode"
3. Click OK button to confirm your selection.
DDC Instructions
4. Click icon (Read EDID function) to read DDC EDID data from
monitor. The EDID codes will display on screen as shown in Fig. 35.
Step 4: Modify DDC data (verify EDID version, week, year)
1. Click (new function) icon from the tool bar, bring up
Step 1 of 9 (Digital) as shown in Fig. 36 .
EDID4.6 DDC application provides the function selection and
text change (select & fill out) from Step 1 to Step 9.
Fig.33
Fig.34
Fig.37
Fig.35
Fig.36
Fig.38