Connecting To An Ac Outlet - Pentax PocketJet 3 User Manual

Connecting to an AC Outlet

Connect the printer to a nearby AC power outlet to run it on AC power
or to charge the battery (see Charge the Battery, page 4).
1. Connect the AC adapter to the printer as shown in Figure 2.
2. Connect the AC power cord to the AC adapter.
3. Plug the AC power cord into a nearby AC power outlet (100~240
VAC, 50-60 Hz).
FIGURE 2. Connecting the printer to an AC power outlet
The PocketJet works from DC sources from 10 to 17V, and can require
as much as 2.6A. Operation below 14 volts may slow printing
somewhat.
NOTE: The plug on the AC power cord shown in Figure 2 is
compatible with AC power outlets in the U.S.A., Canada,
and some Central and South American countries. A plug
adapter may be necessary for AC power in other countries
or you can contact your local reseller or Pentax for further
assistance.
Page 2