Pentax PocketJet 3 User Manual page 19

Pentax user's guide printer pocketjet 3, pocketjet 3 plus
Hide thumbs Also See for PocketJet 3:
Table of Contents

Advertisement

Auto-On:
When external power is applied to the printer, there are three
possible actions that the printer may take.
If Auto-On is set to 'Disabled', the printer will place itself in a
"sleep" state where minimal power is used. The printer's
internal processor is kept alive, but no LEDs are lit and no
printing is possible. The Main Switch must be pressed to
wake the printer up for printing.
If Auto-On is set to 'Enabled', the printer will power up as
soon as an external power source is connected to the printer.
This can be useful in certain mobile installations where
access to the Main Switch is difficult or unavailable.
If Auto-On is set to 'Enabled-No Main Switch', the printer will
power up as soon as an external power source is connected,
and furthermore, the Main Switch cannot be used to turn the
printer off. This may be useful in some mobile installations
where the button could be accidentally pressed. Power
must be disconnected to shut off the printer.
Auto-Off:
When the printer is running on battery power, you may wish to
have the printer turn off automatically to conserve the battery.
You may choose to disable this feature by selecting 'None', or
you may select either a 10-minute or 30-minute time-out
period. If no data is received within the period selected, the
printer will turn itself off.
Page 11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pocketjet 3, 3 plusPocketjet 3 plus

Table of Contents