Paper Type
Paper Loading
Form Feed Modes
Interfaces
USB
IrDA
Environmental
Temperature
Humidity
Electrical
Pentax AC Power Supply
Alternate Power Sources
Printer Power Connector
Power Usage @ 14.4 VDC
Custom
4.13" (105mm) x 1.00" minimum
8.6" (218.5mm) x 27 feet (at 200 dpi) max.
8.6" (218.5mm) x 18 feet (at 300 dpi) max.
(14" maximum length recommended)
Thermal—Cut Sheet, Roll Paper,
Perforated Roll, or Fanfold Paper
Manual—Single Sheet or Roll
No Feed Mode
Fixed Page Mode
End of Page Mode
Printer: USB "Mini-B" and IrDA
(Using USB 1.1 "High Speed")
Host: USB "A" and IrDA
Tiny TP extension to IrLMP, IrCOMM
(COM port emulation using 3 wire "cooked"
serial mode [IrLPT]), and IrOBEX, vCard,
vCal and vMSG (text portions only).
Operating: 41º to 95 F (-10º to 35º C)
Note: Operation at low temperatures may
slow the printer or cause it not to print at all.
Storage: 5º to 122º F (-15º to +50º C)
Operating: 30-80% RH, non-condensing
Storage: 30-85% RH, non-condensing
Input: 100~240 VAC, 50~60 Hz
1 A Maximum
Output: 15 VDC
DC: 10.0~14.4V from NiMH battery
DC: 10~17 VDC from an external source
EIAJ RC-6705 Type A
Operating:
Page 56
(2.1mm barrel connector)
3.5A peak, 2.6A continuous