Filling Out Labels
Remove the protective film from the handset display. Using a ballpoint pen or pencil only,
write the following information on the erasable labels:
Handset Display Labels (6)
On the handset display labels,
write the line numbers or pro-
grammed features assigned to
each of the outside line/program-
mable/intercom/drop buttons.
For more information, see
Chapter 6, "MDW 9010 Compat-
ibility."
NOTE:
If you use a pencil or ballpoint pen on these labels, you will be able to erase the
information later. Do not use felt-tip or other types of non-erasable markers. Also, do
not remove the labels.
2-34
Installing the MDW 9010
(Local Test Mode shown)
Handset
Battery Charger
Extension Label
Extension Label
On the handset extension label
(below the mouthpiece) and on
the battery charger's extension
label, write the phone's extension
number.