Pentax OptioV20 Operating Manual page 145

To Select the Brightness Filter
5
Use the four-way controller (23) to select the digital
filter you want to use.
6
Use the four-way controller (45)
to adjust the effect.
For the brightness filter, the brightness
increases each time you press the four-way
controller (5) and decreases each time you
press the four-way controller (4).
7
Press the 4 button.
A confirmation dialog for overwriting the image appears.
When an image is protected, the image will be saved as a new image
without the confirmation dialog displayed on the screen.
8
Use the four-way controller (23) to select [Overwrite]
or [Save as].
9
Press the 4 button.
The edited image is saved with the same number of recorded pixels
and quality level as the original.
Movies or images taken with another camera cannot be edited using
[Digital Filter]. An error message appears if you choose this function
from the Playback Mode Palette and press the 4 button.
Cancel Cancel Cancel
MENU
OK OK OK
OK
6
143