Pentax OptioV20 Operating Manual page 97

3
Press the four-way controller (5).
The White Balance screen appears.
4
Use the four-way controller (23)
to change the setting.
5
Press the 4 button.
The White Balance setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
Refer to "Manual Setting" below for instructions on adjusting the white
balance manually.
If you use the [White Balance] function frequently, you can save time
by assigning it to the Green button. (p.58)
Saving the White Balance 1p.106
Manual Setting
Have a blank sheet of white paper or similar material ready.
1
In the White balance screen, use the four-way controller
(23) to select K (Manual).
2
Point the camera at the blank
sheet of paper or other material so
that it fills the frame displayed in
the center of the screen.
3
Press the shutter release button
fully.
The white balance is automatically adjusted.
4
Press the 4 button.
The setting is saved and the screen returns to the [A Rec.Mode].
5
Press the 3 button.
The camera returns to capture status.
White Balance
Auto Auto Auto
Cancel Cancel Cancel
MENU
White Balance
Adjust
SHUTTER
Cancel Cancel Cancel
MENU
OK OK OK
OK
4
OK OK OK
OK
95