Reducing Camera Shake and Blurring in Photos
(Blur reduction Mode)
Camera shake and blurring are reduced because the camera
4
automatically increases the Sensitivity setting to allow for low light levels
when taking photos. The shutter speed and aperture are also set
automatically.
1
Press the four-way controller (3) in Capture mode.
The Mode Palette appears.
2
Use the four-way controller
(2345) to select
reduction mode).
3
Press the OK button.
4
Press the shutter release button
halfway.
The focus frame on the LCD monitor will light green when the camera
is in focus.
5
Press the shutter release button fully.
The picture is taken.
• The Recorded Pixels are fixed at 4M and cannot be changed.
• When Sensitivity is set to auto, it may be set automatically at the
maximum ISO 1600 if necessary.
64
Shutter release button
Four-way controller
OK button
(Blur
Blur reduction
Cancel
MENU
OK
OK