Pentax OPTIO S4I Operating Manual page 49

5
Take the first image.
Press the shutter release button to take the
first image. The right edge of the image
appears in half-transparent form on the left
of the LCD monitor.
6
Move the camera to the right and
take the second image.
Move the camera until the half-transparent
image and the actual view overlap and
press the shutter release button. Repeat
Steps 5 and 6 to take the third and
subsequent images.
7
Press the OK button.
The screen returns to Step 4.
To cancel Panorama Assist mode, change to another mode.
• The camera cannot join the images. Use the panorama software
supplied with the camera (ACDSee for PENTAX, ACD
Photostitcher). Refer to "Viewing Digital Camera Images on a PC"
for instructions on creating panorama pictures.
• Continuous shooting is not possible in Panorama Assist mode.
11 11 11
04/14/2004 04/14/2004 04/14/2004
12:00 12:00 12:00
10 10 10
04/14/2004 04/14/2004 04/14/2004
12:00 12:00 12:00
4
47