Settings; Camera Settings; Formatting A Sd Memory Card/Multimediacard And The Built-In Memory; Changing The Sound Settings - Pentax Optio S Operating Manual

e05_kb341_110_136_41e.qk 03.2.14

Settings

Camera Settings

How to recall the [ Set-up] menu
Four-way controller
(OK button in the
center)
Menu button

Formatting a SD Memory Card/MultiMediaCard and the Built-in memory

Formatting will delete all the data on the SD Memory Card/
MultiMediaCard if you are using a card, and all the data in the
Built-in memory if there is no card inserted.
• Do not remove the SD Memory Card/MultiMediaCard
Caution
while the card is being formatted. The card may be dam-
aged and become unusable.
• Formatting will delete protected data too.
z
Select [Format] on the [
x
Press the four-way controller ( ).
The Format screen will be displayed.
c
Select [Format] with the four-way controller ( ).
v
Press the OK button.
Formatting will start. When formatting is completed,
the camera is ready to capture images.
110
4:09 PM Page 110
Rec. Mode
Recorded Pixels 2048 1556
Quality Level
White Balance AWB
Focusing Area Multiple
AE Metering
Sensitivity Auto
1/3 Exit OK Ok
MENU
Set-up] menu.
Set-up
Format
Sound On
Start-up Screen On
Date Style
mm/dd/yy
Date Adjust 1/ 1/2003
World Time Off
1/3
MENU Exit OK Ok

Changing the Sound Settings

You can change the volume of the start-up sound, shutter sound
and button sounds. You can also change the type of each sound.
Changing the volume
z
Select [Sound] on the [ Set-up] menu.
x
Press the four-way controller ( ).
The Sound screen will be displayed.
c
Select [Volume] with the four-way
controller ( ).
v
Use the four-way controller (
change the volume.
b
Press the OK button twice.
The camera is ready to capture or play back images.
Changing the type of start-up, shutter or operation sound
z
Select [Sound] on the [ Set-up] menu.
x
Press the four-way controller ( ).
The Volume screen will be displayed.
c
Press the four-way controller (
Sound] and choose [1], [2], [3] or [Off] with the four-way
controller ( ).
v
Change the [Shutter sound] and [Operation Sound] in
the same way.
b
Press the OK button twice.
The camera is ready to capture or play back images.
Sound
Volume
Start-up Sound 1
Shutter Sound 1
) to
Operation Sound 1
Exit OK Ok
MENU
) to select [Start-up
111