Setting The Date And Time - Pentax Optio S Operating Manual

e02_kb341_001_027_41e.qk 03.2.14

Setting the Date and Time

Set the current date and time.
z
Use the four-way controller (
to change the month.
x
Press the four-way controller ( ).
and will be displayed above
and below the day.
c
Use the four-way controller (
to change the day and press the
four-way controller ( ).
and will be displayed above
and below the year.
v c
Repeat Step to change the
[year] [hour] and [minutes].
b
Use the Display button to select
the 12-hour or 24-hour display
format.
20
4:04 PM Page 20
)
Date Adjust
1 / 1 / 2003
0 : 00
12/24
MENU Exit DISP OK Ok
Date Adjust
1 / 1 / 2003
0 : 00
Exit 12/24 Ok
MENU DISP OK
)
Date Adjust
10 / 20 / 2003
0 : 00
12/24
MENU Exit DISP Exit OK Ok
Date Adjust
10 / 20 / 2003
0 : 00
12/24
Exit Exit Ok
MENU DISP OK
Date Adjust
10 / 20 / 2003
11 : 19 PM
Exit 12/24 Exit Ok
MENU DISP OK
n
When you have finished the settings, press the OK but-
ton when the clock reaches 00 seconds.
The camera is ready to take a picture.
When you set date and time except the initial settings,
press the OK button again after pressing the OK button
when the clock reaches 00 seconds to return to capture
mode.
• When the initial settings screen is displayed, you can cancel
memo
the settings operation and switch to Capture mode by press-
ing the MENU button. If this is done, the initial settings screen
will be displayed next time you turn the camera on.
• You can change the settings after they have been made.
Refer to "Changing the Date/Time" (p.114).
21