Viewing Images With Your Macintosh; About The Included Software; System Environment; Installing The Software - Pentax Optio S Operating Manual

e04_kb341_079_109_41e.qk 03.2.14

Viewing Images with your Macintosh

By using the provided USB cable (I-USB7) or card reader and
image-browser software, you can transfer images recorded with
the camera to your Macintosh and edit them or print them out.
This section explains how to view images on your Macintosh
using the provided software (S-SW8).

About the included software

The included CD-ROM (S-SW8) contains the following software:
• USB driver
• Image viewing software (ACDSee™)

System environment

OS: Mac OS 8.6 or later (QuickTime 4.0 or later required)
CPU: Power PC 266MHz or higher
Memory: 8MB or more
Hard disk space: 6MB or more
Standard equipped USB port
• When you connect the camera to your Macintosh, you
Caution
are recommended to use the AC adapter D-AC8. If the
battery power runs out while image data is being trans-
ferred, the data may be lost.
106
4:07 PM Page 106

Installing the software

z
Turn on your Macintosh.
x
Insert the CD-ROM (S-SW8)
into your Mac's CD-ROM
drive.
c
Double click the [CD-ROM
(S-SW8)].
The title screen will appear
on your desktop.
v
Double Click the [Master Installer].
b
Double-click the [Master Installer] alias icon.
The PENTAX Software Installer screen will appear.
n
Click your applicable language.
You can choose the lan-
guage from the following:
English, French, German,
Spanish, Italian and
Japanese.
Installing the USB driver (Mac OS 8.6 only)
m
Click [USB Driver].
The USB driver will be installed.
When installation is completed, reboot your Macintosh.
• The USB driver does not need to be installed on Mac OS 9.0
memo
and later versions.
Installing ACDSee™
When you install ACDSee™, you can edit and manage
image files on your Macintosh.
m
Click [ACDSee™].
The Setup screen will appear. Follow the on-screen guid-
ance and enter the registration information.
When installation is completed, reboot your Macintosh.
107