Sharp PC-1500A Instruction Manual page 81

All and more about Sharp PC-1500 at http:f/www.PC-1500.info
C.11. STATUS
To display hmv much program memory vou have left available or hO\V much memory a
program uses. the STATUS function is used.
STATUS 0 lunul
will display how many program "steps" are still available.
STATUS 1 l•NT£•1
will display th9 number of steps already used.
STATUS 2 lum:•I
will display the memory address where the current program ends.
Note
that this address is
actually one greater than the actual address where the program ends.
STATUS 3 lum•I
will display the memory address where variable are stored . Note that this address is actually
one location less than the actual address where variables are stored.
STATUS 4 l<N TlRI - STATUS 100 iurul
will d isplay the program li ne number that was being e•ecuted when program ••e<:ution was
halted.
MEM IE>mRI
The MEM command is equivalent to the instruction STATUS 0 \£MTERI .
Program.d.;)ta memory
STATUS 1
l••r<•)
Free are.a
STATUSG
\ ENT<RI
STATUS 3
\ENTERI
Freearea: isobtained by '"STATUS3 - STATUS2+1".
C.12. TIME
To d isplay or set the month, date. and hour the TIM E function is used in the following manner:
Setting: TIME
Q
MM DDHH . MMSS
~
Display : T IME l••TE•I
where: MM represents two digits for the month, DD two digits for the day, and HH two digits
lor the hour. The fractional porrion defines the minutes (MM) and seconds (SS).
When displaying TIME, the output will
be
in the same format just given. The result of the
function can
be
handled in the same manner as a number and can also
be
used freely in
expressions.
Do not sale this PDF!!!
79