Sharp PC-1500A Instruction Manual page 117

All and more about Sharp PC-1500 at http://www.PC-1500.info
t6) Execute RECORD instruction.
Program: CSAVE·1 "file name" l•••tRI
Data : PR
I NT
l; ·
1, "file name" ; variable, variable • . . . .
(Exarn1>le) Designate PRO or RUN mode.
C$AVE· 1·· PR· l"
( CHICA!
After the saving the " prompt" will re·appear on the display and tape stops. fiewind
the tape for collation.
2.
Collating the Computer and Tape Contents
Procedu res:
(1 )
Type RMT OFF l•• •••I to clear remote control functions.
(2) Re1;•1ind the tape to the place at which you started, aga in using the nurnber counter.
(3) Enter RMT ON and tt"le lr:.HttRI key to s et remote contr ol functions.
(4) Set the volume and tone
controls in the
same manner
as
that
e~pla ined
previously in
'!he
single tape recorder.
(5) Press Playback button_
(6) Execu te COLLATION instruction.
CLOAD?-1" file name" l••rul
(Example) Designate PRO o r RUN mode . CLOAD' ·1 " PR· l " l•••ERI
Execution ends when both contents match. resulting in prompt displays.
3. T rcinsfer from Tape
Procedures:
( 1) Enter AMT OFF and the l<•t<•I key to clear remote control functions.
(2) Put a recorded tape into the tape reco rder.
(3) Type RMT ON and p ress the l••TE•I to set remote control functions.
{4 J Set the volume and tone controls in the same manner as that explained previously in the
single tape recorder.
{5) Press the Pl•yback button.
{6) Execute TRANSFE R instruction.
Program : CL0AD·1 ... f ile name" f<•TE•I
Data :
INPUT ~
-1. "file name" ; variable. varialbe, . . . ... lc•rt•)
!Example) Designate PRO or RUN mode.
CLOAD· 1 "PR· 1" l•• TE•I
Alter the iransfer. promp1 displays result
11 5
Do not sale this PDF !!!