Sharp PC-1500A Instruction Manual page 121

All and more about Sharp PC-1500 at http:/lwww.PC-1500.info
LLIST "label",
Prints program lines beginning with the line containing the given label and continui ng
10 the end.
NOTE : Specification of a label which does not e xist will
be
signaled by an ERRO R 11
message.
When printing • program, the color used will be the color w hich was previously specified.
If
you have just turned the mochine on. this will
be
whatever color pen you have selected to
correspond t o Color
fiJ.
To change the color. you muS! issue the Color command (see appropriate
section).
The character size used to list a program is dependent on the previous specification. If the
previous character size specified was size
1
or
siie
2.
then this size remains in effect. If the
previous size
\'1a-s
larger than 2. then size 2 is
used.
The LUST command caus ..
s
the printer mode
to
be se t to TEXT.
If
y ou were in
GRAPH
mode and wish to return to this mode, you most issoc the GRAPH command.
Whi le listi ng
a
prooram th e PC· 1500A computer anempt to justify the program lines for
rcadobility. This is done by leaving spaces in the line numbers. Linc numbers \Vhich arc 1 to 3
digits w ide will
be
right justified with in a 3 character field. Line numbers .. -mich are 4 or 5 digits
wide \.viii
be
printed in a 5 character field :
10: REM WIDTH 3
20: REM
300:
REM
2001: REM WIDTH 5
2010: REM
Do not sale this PDF !!!
119