Sharp PC-1500A Instruction Manual page 122

All and more about Sharp PC-1500 at http://www.PC-1500.info
C.6 . PROGRAMMABLE PRINTER CONTROL
C.6.1. CSIZE
The CSIZE command specifies the size of the characters for all subsequent printing. There arc
nine si zes avai lable, ranging from 36 characters per printed line to 4 characters per prin ted line.
The form of the CSIZE command is:
CSIZE expression
(ei'lher mode)
The expression must evaluate to a number in the range 1 through 9. The width and heigh t of the
characters for each size is given in the follo\vir'g tab,le:
Tab le 1:
CS IZE
1
2 3 4 5
6
7
8
9
Characters per printed
36
18
12
9
7
6 5
4 4
line.
Height of each
1.2
2.4
3:.6
4.8
6.0 7.2 8.4 9.6 10.8
character (rnm)
Width of each character
0.8
1.6
2.4
3.2 4.0
4.8
5.6 6.4
7.2
(mm)
C.6.2. ROTATE
The ROTATE <:OMl' M nd is used, in
GRAF'H
Mode on ly. to specify the direction in which
printing occurs. Four d irections are possible: Up , Down, Left to Right, and Right to Left (with
the lette r upside d ownl. The directions are illustrated in Figure 1. The form o f the ROTATE
command is:
ROT ATE expression
{GRAPH mode only)
The expression must evaluate to a number in the range O to 3. ROTATE O designates the
normal manner of printing characters from Left to Right.
Figure 1:
2 -<- a11
Do not sale this PDF !!!
3
t
co
~
)>
"'
!
1
AB -> 0
120