Table of Contents
Advertisement
t
earing off continuous forms
1.
With the SEL indicator illuminated, press and hold the LF/FF
button to move the continuous form to the next page.
2.
Press TEAR to align the tear-off perforations on the form with the
paper cutter on the printer.
3.
Carefully tear off the forms along the tear-off perforations using
the paper cutter as a guide. Using excessive force may result in
tearing at a position other than the tear-off perforations.
4.
Press the TEAR button to reposition the continuous forms in the
printer back to the first line print position.
a
ligning the tear
If the tear-off perforations are not aligned with the paper cutter, align
them as follows:
1.
Remove the Top Cover of your printer.
2.
With the SEL indicator illuminated, press and hold the TEAR
button to move the tear-off perforations to the paper cutter.
3.
Check the position of the tear-off perforations (1) relative to the
paper cutter (2).
(a)
-
off Perforations
To advance the forms, continue to hold down the TEAR
button and then the SEL button.
ML1120 Plus/ML1190 Plus User's Guide - Paper handling > 31
1
2
Advertisement
Table of Contents
