External Device Features; Doorphone Call - Panasonic KX-HTS824 Feature Manual

3.11 External Device Features

When the Extension group receives the paging call, if all extension
group member cannot answer the paging call, the Caller will hear the
busy tone.
Paging calls are targeted for limited simultaneous calls.
If more than 2 Remote extensions are included in paging or paged
member, paging doesn't work. Paging member hear busy tone.
2.3.4 PBX Configuration—[2-4] Extension—Extension Group
3.11 External Device Features

3.11.1 Doorphone Call

Description
It is possible to connect doorphones directly to the PBX. When a visitor presses the call button on a
doorphone, the doorphone calls a preprogrammed destination (extension). In addition, extension users can
dial the preset number of a doorphone to call that doorphone.
Operation
[Receive a doorphone call]
When pressing the call button on a doorphone, a ring back tone is heard and an extension will be called.
Answer the call that rings at the incoming doorphone call destination set through Web Maintenance
Console.
[Make a doorphone call]
While a dial tone is heard, call the floating extension number assigned to the doorphone. After a
confirmation tone is heard, a conversation will start.
Conditions
Hardware Requirement: An optional doorphone, and doorphone
card.
Up to two doorphones can be installed.
Set each incoming doorphone call destination for each Time mode
(Day/Lunch/Night).
It is possible to set a floating extension number and name for each
doorphone port. When a call is received at an extension from the
doorphone, the preset floating extension number and name will be
notified to the extension.
If an extension does not answer an incoming call from the
doorphone within a preprogrammed time period, the call will be
disconnected.
60 Feature Manual
Conditions
PIL Reference
Conditions
Note
Refer to 2.3.3 System Capacity in
Getting Started
Note