Panasonic KX-HTS824 Feature Manual page 63

Note
This CDR data can be used just for reference. This is because an accurate duration of a call may not be
counted by CDR data, when the call is transferred (Call Transfer) or parked (Call Park).
CDR file information recording is as follows:
Column Item
1 Account Code
2 Caller
3 Callee
4 Source Channel
5 Destination
Channel
6 Feature
7 Option 1
8 Option 2
9 Start Time
10 Answer Time
11 End Time
12 Total Duration
13 Talking Duration
14 Status
*1
Shows the account code appended to the call.
Outgoing call:
Shows the caller's extension number.
Incoming trunk call:
Shows the Caller ID.
Blind transferring call:
Shows "*".
Shows the destination dial number.
Shows the channel that is used by the caller. The information
recorded varies depending on the type of terminal or trunk. For more
information, refer to [Channel Information].
Incoming call:
Shows the channel that is used by the called party.
Outgoing trunk call:
Shows the trunk channel that is used by the caller.
The information recorded varies depending on the type of terminal or
trunk. For more information, refer to [Channel Information].
If the called party is a floating extension (Voicemail, Paging or
MeetMe), the following feature names are displayed:
•
Voicemail
•
Paging
•
MeetMe
Used as developer's information.
Used as developer's information.
Shows the date and the start time of the call.
Shows the date and time of answering the call.
Shows the date and the end time of a call.
Shows the duration of the call including the ring duration. (Seconds)
Shows the duration of the conversation. (Seconds)
The call making/receiving results are displayed as below:
•
ANSWERED
•
NO ANSWERED
•
BUSY
•
FAILED
3.12.2 CDR (Call Detail Record)
Description
Feature Manual 63