Deleting The Complete Phone Book; Registering The Handset; Making Internal Calls - Gigaset A18H User Manual

Storing the IP number into the phone book
f
¢
|
¢ ¢
(open menu) PHONEBOOK
~
¢
IP DIALING
~
¢
(enter name: max. 12 characters)
S
¢ (enter IP code, e.g. 17910 = China Unicom)
2 3
¢
press and hold (enter pause)
(select language, 
or or
S
¢
e.g. 1 = Mandarin)
~
¢ press and hold (enter pause)
(enter IP card number and PIN)
The IP number is stored in the phone book.

Deleting the complete phone book

This action will delete all entries in the handset's
phone book including speed dialling numbers. IP
f
¢
dialling numbers are not deleted.
|
¢ ¢
(open menu) PHONEBOOK
|
¢
DELETE ALL
(confirm action)

Registering the handset

Before you can use your handset, it must be regis-
tered to the base station. You must initiate handset
registration on the handset and on the base station.
Note: If the handset has been delivered with a base
station it is registered
On the base
¤
Activate the registration function.
f
On the handset
¢
|
¢ ¢
(open menu)
ADVANCED SET
~
REGISTRATION
(enter current PIN, default: 0000)
The handset is assigned the lowest unassigned inter-
nal number (1–4).
Once the handset has been registered successfully, it
returns to idle mode. The name (default: Gigaset) and
the handset's internal number is shown in the display,
e.g. .
Gigaset 1
If the handset was not registered successfully, the dis-
play will show
PLS REG H/S
cedure.
Please note
◆
¢
The default system PIN may have been
changed, ( page 12).
◆
¢
The handset name can be changed,
( page 11).
|
¢
|
¢
|
¢
|
¢
|
¢
|
¢
. In this case repeat the pro-
10
Deregistering the handset
f
¢
Precondition: the handset is in idle mode.
¢ ¢
(open menu)
~
UNREGISTER
p
¢
(enter current PIN)
(select handset to be deregistered)
A long confirmation tone indicates the successful
deregistration. The handset display will show
.
H/S
Please note
Do not deregister handsets unless necessary!

Making internal calls

Internal calls are free calls to other handsets that are
registered to the same base station or to the base sta-
tion itself.
Calling another internal participant
k ~
¢
(enter internal number of participant)
0 = base station
1-4 = handset number
* = all
If only 1 handset is registered you need not enter a
number to call the handset from the base.
Accepting internal call
¤
To answer the call press
¤
To end the call, press
Incoming call during internal call
c
An incoming call is indicated by an acoustic signal.
k
(answer external call, end internal call) or
k
¢ (hold internal call, accept external call)
(start conference)
Internal consultation calls
When you are speaking to an external participant,
you can call an internal participant at the same time
k
for consultation.
k ~
¢
Press and hold
(enter internal number of participant)
k
You are connected with the internal participant.
(toggle between internal and external partici-
pant)
Transferring a call to another handset
k
You can transfer an external call to another handset.
k ~
¢
Press and hold
(enter internal number of participant)
a
You are connected with the internal participant.
(transfer external call to internal participant)
|
¢
|
ADVANCED SET
|
¢
¢
c
a .
.
(put external call on hold)
(put external call on hold)
|
PLS REG