Nv Graphics Information Print Mode - Epson TM-T88V Technical Reference Manual

Follow the steps below.
1
Close the roll paper cover.
2
While pressing the Feed button, turn on the printer. (Hold down the Feed
button until printing starts.)
After printing the current print status, a Continuing self-test guidance is printed, and the
Power LED flashes.
3
Briefly press the Feed button (less than one second) to continue the self-
test.
The printer prints a rolling pattern on the roll paper, using the built-in character set.
After "*** completed ***" is printed, the printer initializes and switches to standard mode.

NV Graphics Information Print Mode

Prints the following NV graphic information registered to the printer.
• NV graphics capacity
• NV graphics usage capacity
• NV graphics free capacity
• NV graphics registration
• Key code for each data, number of X direction dots, number of Y direction dots
• NV graphics data
For details on NV graphics, see
Follow the steps below.
1
After running a self-test, hold down the Feed button for at least one sec-
ond, and then select the Mode selection.
The Mode selection guidance is printed, and the Paper LED flashes.
2
After briefly (less than one second) pressing the Feed button once, hold
it down for at least one second, to print the NV graphics information.
After information printing, the Mode selection guidance is printed again.
3
To finish, turn off the power, or select "Exit and Reboot Printer".
70
"NV Graphics Memory" on page 22.