Connecting The Optional External Buzzer; Installing A Buzzer; Printer Settings - Epson TM-T88V Technical Reference Manual

Connecting the Optional External Buzzer

You can use the optional external buzzer (OT-BZ20) by connecting it to the drawer kick
connector.
You need to change the printer settings to make sure that it can be used.
• The optional external buzzer and the cash drawer cannot be used together at the same
• If you enable the optional external buzzer, the cash drawer cannot be operated even if it
• You cannot use the built-in buzzer and the optional external buzzer. When using an

Installing a Buzzer

See the buzzer's user's manual for details on installing the buzzer.

Printer Settings

The optional external buzzer is disabled by default. Follow the steps below to change the
memory switch (custom values) to make sure it is enabled.
Changing Settings Using the Utility
1
Start the APD5 Utility or TM-T88V Utility.
For details, see the "Advanced Printer Driver Ver.5 Printer Manual" or the "TM-T88V Util-
ity User's Manual".
2
Click "Option Buzzer" from the menu, and then select "Use Buzzer".
3
Set the timing and beep pattern for the optional buzzer as necessary.
time. Do not connect them both to the printer at the same time by using a branch cable.
is connected.
optional external buzzer on a model with a built-in buzzer, set the DIP switches for the
built-in buzzer to "Do not operate" for each drawer kick connector pin 2/pin 5.
Chapter 2 Setup
2
43