Power Switch Cover
Install the power switch cover that comes with the TM-T88V onto the printer to prevent
inadvertent changing of the power switch, to prevent tampering, and to improve the appearance
of the printer.
To reset the printer when the power switch cover is installed, insert a long, thin object (such as
the end of a paper clip) into the hole in the power switch cover and press the power switch.
If an accident occurs with the power switch cover attached, unplug the power cord
immediately.
Continued use of the printer may cause fire or shock.
WARNING
Roll paper cover/Cover open button
• When loading and replacing roll paper, use the cover open button to open the roll paper cover.
• Do not open the cover during printing or while the auto cutter is operating.
Cutter cover
Houses the autocutter. Open this when you need to move the cutter manually.
Control Panel
16
(Power) LED
Error LED
Paper LED
Feed button