One-Touch Dialling Button; One-Touch Dialling With Auto Hold Button - Panasonic KX-TD816/1232AL User Manual Addendum

2.2
3
AUTO DIAL
STORE
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Condition
• "Class of Service " programming determines the extensions that can perform this feature.
Programming References
• System Programming —Installation Manual & Installation Manual Addendum
[513] Night Service Access

One-Touch Dialling with Auto Hold Button

Allows you to assign a Flexible (CO, DSS, PF) button as an One-Touch Dialling with Auto
Hold button.
During a conversation, the call is put on hold and transferred to the assigned number.
You can make a call to the assigned number by pressing this button as well as pressing the

One-Touch dialling button.

— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
1
2
8
3
desired number
4
AUTO DIAL
STORE
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
36
Programming
3. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
[601]
1. Press the desired Flexible (CO, DSS, PF) button you wish to assign
as an One-Touch Dialling with Auto Hold button.
2. Dial 8#.
3. Enter the desired number.
• Up to 24 digits can be stored.
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button when using the overlay.)
4. Press the STORE button.
• The STORE indicator light turns on.
• The display shows the initial programming mode.
Class of Service
(Assignment)