Disassembly Procedures - Yamaha CDX-396 Manual

DISASSEMBLY PROCEDURES

1. Removal of Top Cover
a. Remove 4 screws ( 1 ) and 3 screws ( 2 ) in Fig. 1.
b. Lift the Top Cover at the rear and move it rear-ward.
2. Removal of Front Panel
a. Press the OPEN/CLOSE key and open the tray.
Then remove the Lid attached to the front edge of
the tray in Fig. 2.
Press the OPEN/CLOSE key and close the tray,
then unplug the power cord.
b. Remove 2 connectors (CB202, CB301) in Fig. 2.
c. Remove a connector (CB100) in Fig. 2. (CDX-496
only)
d. Remove 5 ( 3 ) screws in Fig. 1.
e. Remove 2 hooks and then pull the Front Panel for-
ward.
3. Removal of CD Mechanism Unit
a. Remove 3 connectors (CB1, CB2, CB3) in Fig. 2.
b. Remove 4 screws ( 4 ) in Fig. 1.
4. Removal of Tray Unit
a. Remove 2 screws ( 5 ) and then remove the
Chucking Unit in Fig. 3.
b. Remove 1 hook and then remove the Stopper Pin
in Fig. 3.
c. Rotate the Drive Gear and then open the Tray Unit
in Fig. 3.
d. Detach the Stoppers on both sides and then pull
out the Tray in Fig. 3.
5. Removal of Pick-up Head
a. Remove 2 screws ( 6 ) in Fig. 4.
b. Remove 4 screws ( 7 ) and then remove the Drive
Unit in Fig. 4.
c. Remove the gear A in Fig. 5.
d. Pull out the Sled Shaft in Fig. 5.
e. Remove the Pick-up Head.
Chucking Unit
Stopper
Drive Gear
(Remove parts in disassembly order as numbered.)
Stopper Pin
5
Hook
Stopper
Fig. 3
Top Cover
1
4
4
CD Mchanism
Unit
Front Panel
3
3
Lid
CB203
CB2
Sub Chassis (S)
Drive Unit
7
7
CDX-396/496
2
1
3
3
Fig. 1
CB101 PJ100
CB200
CB1
CB3
CB100
CB301
Fig. 2
6
Fig. 4
6