Yamaha CD-S3000 Owner's Manual page 6

Controls and functions
■ Front panel (pages 6 to 9)
STANDBY/ON PURE DIRECT
OFF
1 2
1 STANDBY/ON/OFF switch
Turns on or off this unit.
STANDBY/ON (upper position):
In this position, you can select STANDBY or ON,
using the p CD key on the remote control.
OFF (lower position):
The power of this unit is turned off.
Notes
• When you turn on this unit, it will take a few seconds
before this unit can reproduce sound.
• If this unit is not operated for 30 minutes with no audio
signal detected, it goes to STANDBY mode (page 15).
• If you disconnect the power cable from the AC outlet and
connect it again when this unit is in STANDBY mode, the
power of the unit is turned on (page 20). If the unit is not to
be operated for a long time, set the STANDBY/ON/OFF
switch to OFF.
6
En
SOURCE LAYER
3 4 5 7
SA-CD HYBRID TRACK TOTAL REMAIN PROG SHUFFLE REP OFF S ALL A-B
LAYER SOURCE
SA-CD CD DISC USB
8
2 STANDBY/ON indicator
Lit brightly:
Shows that the power of the unit is ON. In this
condition, you can switch the unit to STANDBY mode
using the p CD key on the remote control.
Lit dimly:
Shows that the unit is in STANDBY mode. In this
condition, press the p CD key on the remote control
to turn on the unit.
Off:
Shows that the power of the unit is OFF. In this
condition, you can turn on the unit using the
STANDBY/ON/OFF switch only.
OPTICAL COAXIAL
6