Yamaha CD-S2100 Service Manual

Yamaha CD-S2100 Service Manual

Compact disc player
Hide thumbs Also See for CD-S2100:

Advertisement

This manual has been provided for the use of authorized Yamaha Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifi cally Yamaha Products, are already known
and understood by the users, and have therefore not been restated.
WARNING:
IMPORTANT:
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of Yamaha are continually striving to improve Yamaha products. Modifi cations are, therefore, inevitable and specifi cations
are subject to change without notice or obligation to retrofi t. Should any discrepancy appear to exist, please contact the distributor's
Service Division.
WARNING:
IMPORTANT:
■ CONTENTS
TO SERVICE PERSONNEL ........................................2-4
FRONT PANELS .............................................................6
REAR PANELS ...........................................................7-9
REMOTE CONTROL PANEL ........................................ 10
SPECIFICATIONS / 参考仕様 ................................. 10-11
INTERNAL VIEW .......................................................... 12
UPDATING FIRMWARE /
ファームウェアのアップデート ............................24-30
1 0 1 3 0 2
COMPACT DISC PLAYER
CD-S2100
Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specifi ed. For these reasons, we advise
all Yamaha product owners that any service required should be performed by an authorized Yamaha Retailer or the
appointed service representative.
The presentation or sale of this manual to any individual or fi rm does not constitute authorization, certifi cation or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
Copyright (c) Yamaha Corporation All rights reserved.
This manual is copyrighted by Yamaha and may not be copied or
redistributed either in print or electronically without permission.
SERVICE MANUAL
IMPORTANT NOTICE
ダイアグ(自己診断機能) .....................................31-41
DISPLAY DATA .............................................................42
IC DATA ...................................................................43-46
BLOCK DIAGRAM ........................................................47
WIRING DIAGRAMS ...............................................48-49
PRINTED CIRCUIT BOARDS .................................50-59
PIN CONNECTION DIAGRAMS ...................................60
SCHEMATIC DIAGRAMS .......................................61-68
REPLACEMENT PARTS LIST ................................69-82
REMOTE CONTROL .....................................................83
P.O.Box 1, Hamamatsu, Japan
'14.06

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha CD-S2100

  • Page 1: Table Of Contents

    This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifi cally Yamaha Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2: To Service Personnel

    CD-S2100 ■ TO SERVICE PERSONNEL AC LEAKAGE WALL EQUIPMENT TESTER OR 1. Critical Components Information OUTLET UNDER TEST EQUIVALENT Components having special characteristics are marked must be replaced with parts having specifications equal to those originally installed. 2. Leakage Current Measurement (For 120V Models Only)
  • Page 3 CD-S2100 WARNING: Laser Safety This product contains a laser beam component. This component may emit invisible, as well as visible radiation, which may cause eye damage. To protect your eyes and skin from laser radiation, the following precautions must be used during servicing of the unit.
  • Page 4 CD-S2100 Warning for power supply The primary side of the power supply carries live mains voltage when the player is connected to the mains even when the player is switched off ! This primary area is not shielded so it is possible to accidentally touch copper tracks and/or components when servicing the player.
  • Page 5: Prevention Of Electrostatic Discharge

    CD-S2100 ■ PREVENTION OF ELECTROSTATIC DISCHARGE Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage caused by electro static discharge (ESD).
  • Page 6: Front Panels

    CD-S2100 ■ FRONT PANELS U, K, A, B, G, L, V, S, J models T model...
  • Page 7: Rear Panels

    CD-S2100 ■ REAR PANELS U, V, S models Bottom view U model V model...
  • Page 8 CD-S2100 T model K model A, B, G, L models...
  • Page 9 CD-S2100 J model...
  • Page 10: Remote Control Panel

    CD-S2100 ■ REMOTE CONTROL PANEL ■ SPECIFICATIONS / 参考仕様 ■ Audio Section / オーディオ部 CDX30 Output Level / 出力レベル (1 kHz, 0 dB) SA-CD / CD ...............2.0 ±0.4 V Signal to Noise Ratio / 信号対雑音比 (IHF-A network) (1 kHz, 0 dB) SA-CD / CD ..............
  • Page 11 CD-S2100 Power Supply / 電源電圧 Accessories / 付属品 U, V, S models ..........AC 110–120 V, 60 Hz Remote control ................x 1 T model ..............AC 220 V, 50 Hz Battery (R03, AAA, UM-4) .............x 2 K model ..............AC 220 V, 60 Hz Audio pin cable (1.5 m) ..............x 1...
  • Page 12: Internal View

    CD-S2100 ■ INTERNAL VIEW Top view FRONT (8) P.C.B. FRONT (1) P.C.B. DIGITAL P.C.B. FRONT (2) P.C.B. AUDIO P.C.B. POWER TRANSFORMER for AUDIO FRONT (7) P.C.B. MODULE BOARD LOADER MECHANISM UNIT POWER TRANSFORMER for DIGITAL/FRONT FRONT (5) P.C.B. FRONT (3) P.C.B.
  • Page 13: Disassembly Procedures / 分解手順

    CD-S2100 ■ DISASSEMBLY PROCEDURES / 分解手順 (Remove parts in the order as numbered.) (番号順に部品を外してください。 ) Disconnect the power cable from the AC outlet. AC 電源コンセントから、電源コードを抜いてください。 1. Removal of Side Panel L and Side Panel R 1. サイドパネル L、サイドパネル R の外し方...
  • Page 14 CD-S2100 3. Removal of Front Panel 3. フロントパネルの外し方 a. Using a flatblade screwdriver, move the slider at the a. マイナスドライバーで底面のスライダーを下図の矢印 bottom in the direction of the arrow shown below. の方向に動かします。 (Fig. 2) (Fig. 2) ※ このとき、トレイは押し出されません。 Tray lock will be released but will not come out.
  • Page 15 CD-S2100 4. Removal of Front Frame Assembly 4. フロントフレーム Ass'y の外し方 a. Remove 4 screws ( ⑦ ) and then remove the top frame. a. ⑦ のネジ 4 本を外し、トップフレームを外します。 (Fig. 5) (Fig. 5) b. Remove 8 screws ( ⑧ ). (Fig. 5) b.
  • Page 16 CD-S2100 6. Removal of Loader Mechanism Unit 6. ローダーメカユニットの外し方 a. Remove 2 screws ( ⑬ ) and screw ( ⑭ ). (Fig. 7) a. ⑬ のネジ 2 本、⑭ のネジ 1 本を外します。 (Fig. 7) b. Remove CB402, CB404 and CB407. (Fig. 7) b.
  • Page 17 CD-S2100 ● When installing the Loader Mechanism Unit: ● ローダーメカユニットを取り付ける場合: When installing the loader mechanism unit, adjust its ローダーメカユニットを取り付ける場合には、フロン inclination so that the clearance between the front トパネルとリッドの隙間が上下左右同じになるように panel and lid becomes equal at the top, bottom, right ローダーメカユニットの傾きを調整してください。 and left.
  • Page 18 CD-S2100 5. Turning screw ( ③ ), adjust the lid so that it becomes 5. 前面から見てリッドが水平になるように、③ のネ horizontal viewed from the front. (Fig. C) ジを回して調整します。 (Fig. C) To change the position upward, loosen screw ( ③ ) 位置を上方向に変更する場合は、③ のネジを右へ by turning it clockwise.
  • Page 19 CD-S2100 7. Adjust the lid so that the clearance around the disc 7. 前面から見てディスクトレイの隙間が均一になる tray becomes equal viewed from the front. (Fig. D) ように、リッドを調整します。 (Fig. D) Front view “ ” (Open/Close) key “ ” (開閉)キー Adjust the lid for equal clearance around it リ...
  • Page 20 CD-S2100 7. Removal of DIGITAL P.C.B. 7. DIGITAL P.C.B. の外し方 a. Remove 2 screws ( ⑮ ). (Fig. 8) a. ⑮ のネジ 2 本を外します。 (Fig. 8) b. Remove 7 screws ( ⑯ ) and screw ( ⑰ ). (Fig. 9) b.
  • Page 21 CD-S2100 10. Removal of Power Transformer 10. 電源トランスの外し方 Remove 4 screws ( ). (Fig. 10) のネジ 4 本を外します。 (Fig. 10) b. Remove the power transformer for AUDIO P.C.B. AUDIO P.C.B. 用の電源トランスを、サポートと一緒に together with the support. (Fig. 10) 外します。 (Fig. 10)...
  • Page 22 CD-S2100 ● Disassembly of Loader Mechanism Unit ● ローダーメカユニットの分解手順 1. Removal of Module Board 1. モジュールボードの外し方 a. Remove 6 screws ( ) and then remove the clamp のネジ 6 本を外し、クランプ Ass'y を外します。 assembly. (Fig. 11) (Fig. 11) b. Solder the lands in the P.C.B. of the loader b.
  • Page 23 CD-S2100 2. Removal of Loading Belt 2. ローディングベルトの外し方 a. Push out the disc tray by pushing its rear. (Fig. 12) a. ディスクトレイの後方を押し、ディスクトレイを b. Remove 2 screws ( ) and then remove the disc 押し出します。 (Fig. 12) tray. (Fig. 12) のネジ 2 本を外し、ディスクトレイを外します。...
  • Page 24: ファームウェアのアップデート

    CD-S2100 ■ UPDATING FIRMWARE / ファームウェアのアップデート Writing to the microprocessor マイコンへの書き込み When the following parts are replaced, the firmware must 下記の部品を交換した場合、ファームウェアを最新バー be updated to the latest version. ジョンにアップデートする必要があります。 DIGITAL P.C.B. DIGITAL P.C.B. Main microprocessor: IC404 on DIGITAL P.C.B. メインマイコン:DIGITAL P.C.B. の IC404 ●...
  • Page 25 CD-S2100 ● Connection ● 接続 Disconnect the power cable of this unit from the ※ 本機の電源コードを AC コンセントから抜きます。 AC outlet. ・ RS-232C 変換アダプターのスイッチを下記のよう • Set the switches on RS-232C conversion adaptor に設定します。 (Fig. 1) as shown below. (Fig. 1) DSP ucom T...
  • Page 26 CD-S2100 ● Operation procedures ● 操作方法 1. Set the “STANDBY/ON, OFF” (U, K, A, B, G, L, V, S STANDBY/ON、OFF (電源)スイッチを ON models) / “ ” (Power) (T model) switch to the “ON” にします。 position. 2. 本機の電源コードを AC コンセントに接続します。 2. Connect the power cable of this unit to the AC 本機に電源が入り、マイコンが書き込みモードに...
  • Page 27 CD-S2100 5. Click [Refer...] and select the firmware name. 5. [Refer...]をクリックし、書き込むファームウェア (Fig. 4) を選択します。 (Fig. 4) The ID and MCU Type are loaded automatically ※ ID、および MCU Type は書き込みファイル選 when the file is selected. (Fig. 4) 択後、自動的に取り込まれます。 (Fig. 4) Click [OK]. (Fig. 4) [OK]をクリックします。...
  • Page 28 CD-S2100 7. Click [E.P.R.], then the “Erase” screen appears. 7. [E.P.R]をクリックすると、 「Erase」が表示されま (Fig. 6) す。 (Fig. 6) 8. Click [OK] to start writing. (Fig. 6) 8. [OK]をクリックして書き込みを開始します。 (Fig. 6) Writing being executed. 書き込み中 Fig. 6 9. When writing of the firmware is completed, the 9.
  • Page 29 CD-S2100 Writing to the Module Board モジュールボードへの書き込み After replacing the Module board with the replacement モジュールボードをサービス部品に交換した場合、最新 part, be sure to write the latest firmware. のファームウェアの書き込みを行ってください。 ● Required tools ● 必要なツール Firmware CD ファームウェア CD Download the latest firmware from the specified ※...
  • Page 30 CD-S2100 5. Press the “ ” (PLAY) key, and then writing of the (PLAY)キーを押し、 書き込みを開始します。 firmware is started. (Fig. 2) (Fig. 2) FL display “STANDBY/ON, OFF” switch FL ディスプレイ Front view (U, K, A, B, G, L, V, S models) “...
  • Page 31: Self-Diagnostic Function / ダイアグ(自己診断機能

    CD-S2100 ■ SELF-DIAGNOSTIC FUNCTION / ダイアグ(自己診断機能) This unit has self-diagnostic functions that are intended 本機には、検査、測定、不良個所の発見を目的にしたダ for inspection, measurement and location of faulty point. イアグ(自己診断機能)があります。 There are 9 main menu items, each of which has sub- ダイアグには 9 個のメインメニューがあり、そのそれぞ menu items.
  • Page 32 CD-S2100 ● Starting Self-Diagnostic Function ● ダイアグの起動 While pressing the “ ” (Stop), “ ” (Play) and “PURE (停止)と (再生) 、 PURE DIRECT キーを押し DIRECT” keys simultaneously, set the “STANDBY/ON, OFF” ながら、 STANDBY/ON、OFF (電源)スイッチを ON (U, K, A, B, G, L, V, S models) / “ ” (Power) (T model) switch にして電源を入れた後、3 つのキーを放します。...
  • Page 33 CD-S2100 ● History of protection function ● プロテクションの履歴 When the protection function has worked, its history プロテクションが働いた場合、 その履歴はバックアッ is stored in memory as backup data. プデータとしてメモリーに保存されます。 Even if no abnormality is noted while servicing the 修理のときに異常が認められなくても、バックアッ unit, an abnormality which has occurred previously プデータが残っていれば、お客様のところで起きた...
  • Page 34 CD-S2100 ● Operation procedure of Main menu ● メインメニューとサブメニューの操作 and Sub-menu There are 9 main menu items, each of which has sub- ダイアグには 9 個のメインメニューがあり、そのそれぞ menu items. れにサブメニューがあります。 Main menu and Sub-menu selection メインメニューとサブメニューの選択 Select the main menu using “...
  • Page 35 CD-S2100 ● Details of Self-Diagnostic Function menu ● ダイアグメニュー詳細 1. ROM VERSION/CHECKSUM 1. ROM VERSION/CHECKSUM This menu is used to display the firmware version and ファームウェアバージョン、チェックサムが表示さ checksum. れます。 The checksum is obtained by adding the data at every チェックサムは、データを 8 ビットごとに加算して...
  • Page 36 CD-S2100 2. FRONT PANEL KEY CHECK 2. FRONT PANEL KEY CHECK This menu is used to check operation of the panel パネルキーの動作をチェックします。 keys. 2-1. PANEL KEY CHECK MENU 2-1. PANEL KEY CHECK MENU “PANEL KEY CHECK” menu is displayed. PANEL KEY CHECK メニューが表示されます。...
  • Page 37 CD-S2100 3. FL DISPLAY CHECK 3. FL DISPLAY CHECK This menu is used to check operation of the FL FL 表示とインジケーターの動作をチェックします。 display and indicator. 3-1. FL DISPLAY MENU 3 - 1 . D I S P C H K Initial display 初期表示...
  • Page 38 CD-S2100 4. FACTORY PRESET 4. FACTORY PRESET This menu is used to initialization of the back-up data. バックアップデータの初期化をします。 4-1. FACTORY PRESET MENU 4 - 1 . F _ P ? Initial display Press the “LAYER” key. 初期表示 LAYER キーを押します。 4-1. PRESET RESERVED (Initialization reserved) / PRESET RESERVED(初期化予約)...
  • Page 39 CD-S2100 5-2. PRV_R 5-2. PRV_R R channel power supply protection detection R チャンネルの電源電圧プロテクションの検出 Detected: +12VR, -12VR, +5VR, +3.3VR, 検出先: +12VR、-12VR、+5VR、+3.3VR、 AC_R AC_R Detection port: 81 pin of main microprocessor 検出ポート: メインマイコン(DIGITAL P.C.B. の (IC404 on DIGITAL P.C.B.) IC404)の 81 ピン...
  • Page 40 CD-S2100 6. PROTECTION HISTORY 6. PROTECTION HISTORY This menu is used to display the history of protection プロテクション履歴が表示されます。 function. 6-1. HISTORY 1 to HISTORY 4 6-1. HISTORY 1 ∼ HISTORY 4 The display is changed by pressing the “LAYER” LAYER キーを押すと表示が切り替わります。...
  • Page 41 CD-S2100 9. TRAY CHECK 9. TRAY CHECK This menu is used to check the loader mechanism ローダーメカユニットの動作チェックをします。 unit. 本メニュー選択前にディスクトレイへディスクを Before selecting this menu, load a disc to the disc tray. セットしてください。 When using this menu, if the disc tray has no disc in it, ディスクトレイにディスクがセットされていないと、...
  • Page 42: Display Data

    CD-S2100 ■ DISPLAY DATA ● V901 : 013ST087GINK (FRONT (3) P.C.B.) ● PIN CONNECTION Pin No. Connection Q13G Pin No. Connection RESET Pin No. Connection LGND PGND Note: 1) F1, F2 ..Filament 2) NP ..No pin 3) NX ..No extended pin 4) LGND ..
  • Page 43: Ic Data

    CD-S2100 ■ IC DATA IC404: R5F364AENFA (DIGITAL P.C.B.) Microprocessor * No replacement part available. / サービス部品供給なし Port P0 Port P1 Port P1 Port P3 Port P4 Port P5 VCC2 ports Internal peripheral functions System clock generator UART or clock synchronous serial I/O...
  • Page 44 CD-S2100 Function Name Port Name Detail of Function (P.C.B.) P9_6/ANEX1/SOUT4 FL_EX_MOSI FL Driver control data output Extended IC: Data out for LC709004A P9_5/ANEX0/CLK4 FL__EX_CLK FL Driver control clock output Extended IC: Clock for LC709004A P9_4/DA1/TB4IN/PWM1 PULSE_DET Pulse input for tray driving motor...
  • Page 45 CD-S2100 Function Name Port Name Detail of Function (P.C.B.) 41 P5_5/nHOLD STBY_CNT/N_EMP I, O For flash writing (IO) BOOT mode: P5_5=L, CNVSS=H, P5_0=H Set to Pull-down as Hiz state may occur during emulator operation. • +5SPC power ONOFF control (L=OFF, H=ON: For reduction of stand-by power) •...
  • Page 46 CD-S2100 Function Name Port Name Detail of Function (P.C.B.) 77 P1_3/TXD6/SDA6/D11 CD_YOVI Vaddis886 control data out 78 P1_2/RXD6/SCL6/D10 CD_YIVO Vaddis886 control data in 79 P1_1/CLK6/D9 FPGA_IO1 Communication between CPLDs serial clock 80 P1_0/nCTS6/nRTS6/D8 FPGA_IO0 CPLD serial enable 81 P0_7/AN0_7/D7 PRVR...
  • Page 47: Block Diagram

    CD-S2100 ■ BLOCK DIAGRAM • See page 64, 65 → SACD AUDIO SCHEMATIC DIAGRAM Loader mechanism unit SA-CD module Servo controller processor 40 MHz CPLD BALANCED IC424 L ch DIR/DIT IC420 BAL to UNBAL PCM9210PTR TC7WHU04FK buffer PCM/DSD SPDIF IC31...
  • Page 48: Wiring Diagrams

    CD-S2100 ■ WIRING DIAGRAMS • OVERALL ASSEMBLY Top view Bottom view AC IN 12x25 FRONT (2) CB902 CB410 FRONT (8) DIGITAL W901 W903 FRONT (1) to FRONT (3) to DIGITAL (CB406) to Module board (CB910) AUDIO CB408 (CN211) to Module board...
  • Page 49 CD-S2100 • LOADER MECHANISM UNIT Top view to DIGITAL (CB402) to DIGITAL (CB407) Flexible flat cable to DIGITAL (CB407) Letter side 10 mm (3/8") 50 mm (2") Flexible flat cable CN210 CN205 CN211 to Module board CN201 (CN201) Letter side...
  • Page 50: Printed Circuit Boards

    CD-S2100 ■ PRINTED CIRCUIT BOARDS FRONT (3) (CB910) Module board DIGITAL (Side A) (CN211) Module board (CN210) CB404 CB407 • Semiconductor Location CB402 CB405 Loader mechanism unit Ref no. Location D401 IC419 D402 CB406 D405 SEL_SDO_DSDR D407 DGND SEL_SDO_DSDL DGND...
  • Page 51 CD-S2100 DIGITAL (Side B) • Semiconductor Location Ref no. Location D406 D408 D410 D441 D442...
  • Page 52 CD-S2100 • Semiconductor Location Safety measures Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location • Some internal parts in this product contain high voltages and are dangerous. Be sure to take safety measures during servicing, such as wearing insulating gloves.
  • Page 53 CD-S2100 • Semiconductor Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location Ref no. Location D307 Q314 Q324 D308 Q301 Q315 Q325 D309 Q302 Q316 D310 Q303...
  • Page 54 CD-S2100 FRONT (1) (Side A) DIGITAL (CB410) 5 k-ohms 5 k-ohms 10 W 10 W CB902 to POWER TRANSFORMER (for DIGITAL/FRONT P.C.B.) IC905 IC909 to POWER TRANSFORMER (for DIGITAL/FRONT P.C.B.) W902 • Semiconductor Location Ref no. Location 5 k-ohms 5 k-ohms...
  • Page 55 CD-S2100 FRONT (1) (Side B) • Semiconductor Location Ref no. Location D902 D904 D905 D907 D909 D914 D915 D916 D917 D918 D957 D958 Q903...
  • Page 56 CD-S2100 Safety measures 安全対策 • Some internal parts in this product contain high voltages and are dangerous. Be sure to take safety measures during servicing, such ・ この製品の内部には高電圧部分があり危険です。修理の際は、絶縁性の手袋を使用するなどの安全対策を行ってください。 as wearing insulating gloves. ・ 下記のコンデンサには電源を OFF にした後も電荷が残り、高電圧が維持されており危険です。修理作業前に放電用抵抗 • Note that the capacitors indicated below are dangerous even after the power is turned off because an electric charge remains and a (5 kΩ/10 W)を下記の各コンデンサの端子間に接続して放電してください。放電所用時間は各々約...
  • Page 57 CD-S2100 FRONT (2) (Side B) • Semiconductor Location Ref no. Location Ref no. Location D921 D960 D922 D961 D962 D924 D925 D963 D926 D964 D928 D965 D929 IC909 D931 Q904 D932 Q906 D933 Q907 D934 Q908 Q909 D935 D937 Q910...
  • Page 58 CD-S2100 • Semiconductor Location Ref no. Location Ref no. Location D945 D951 D946 D952 D953 D947 D950 D956 FRONT (3) (Side A) Remote control sensor DIGITAL (CB405) S3 UNCLAMP TRAY_SW S1 TRAY CLOSE S4 CLAMP +3.3M MGND CLAMP MOTOR+ CLAMP MOTOR-...
  • Page 59 CD-S2100 FRONT (3) (Side B) IC910 • Semiconductor Location Ref no. Location Ref no. Location D938 D949 D954 D939 D940 D955 D941 IC910 D942 IC911 D943 Q911 D944 Q912 D948 Q913 FRONT (4) FRONT (5) (Side B) (Side B) IC911...
  • Page 60: Pin Connection Diagrams

    CD-S2100 ■ PIN CONNECTION DIAGRAMS • ICs • Diodes ES9016S BA05CC0T BA6956AN BD00GA3WEFJ-E2 EN29LV160CB-70TIP 1SR154-400 1SS355VMTE-17 D4SBN20-7101 RS203M-B-C-J80 S1NB60 1.0A 600V UDZV2.0B UDZV11B BA07CC0T RB520SM-40 UDZV3.3B UDZV12B UDZV3.6B UDZV30B UDZV4.7B Anode UDZV5.1B Anode UDZV5.6B Anode – – – Cathode Cathode...
  • Page 61: Schematic Diagrams

    CD-S2100 SCHEMATIC DIAGRAMS DIGITAL 1/3 D I G I T A L 0 0 1 . s h t D e s t i n a t i o n P a r t L i s t + 1 2 R Y...
  • Page 62 CD-S2100 DIGITAL 2/3 N O T I C E ( m o d e l ) J A P A N U . S . A C A N A D A G E N E R A L C H I N A...
  • Page 63 CD-S2100 DIGITAL 3/3 M e m o r y I / F M A I N A - B u s I / F P u w e r S u p p l y J 4 1 0 J 4 1 1...
  • Page 64 CD-S2100 IC2: R1172S121D-E2-F IC1: TC74VHC541FT AUDIO 1/2 Voltage regulator Octal bus buffer C 9 5 R 8 6 R 9 0 C 1 0 9 Vref 2 . 2 2 . 2 0 . 0 1 ( B ) 0 . 0 1 ( B )
  • Page 65 CD-S2100 AUDIO 2/2 A U D I O 0 0 2 . s h t 4 0 0 N O T I C E ( m o d e l ) J A P A N R 3 0 5 R 3 3 3 U .
  • Page 66 CD-S2100 FRONT 1/3 S A N - P H W 9 0 2 FRONT (1) F R O N T 29.9 + V P 9 0 1 1 0 0 8 Page 68 F L G N D to FRONT (3)_CB908...
  • Page 67 CD-S2100 FRONT 2/3 J K 9 0 3 FRONT (2) J Y - 5 0 4 0 - 0 4 0 F R O N T Q 9 0 6 2 0 0 2 0 0 A 1 0 3 7 A K ( Q / R / S )
  • Page 68 CD-S2100 FRONT 3/3 FRONT (3) F R O N T F R O N T ( 3 ) C B 9 0 8 P H L 29.9 9 0 1 1 0 0 0 + V P F L G N D...
  • Page 69: Replacement Parts List

    CD-S2100 ■ REPLACEMENT PARTS LIST • ELECTRICAL COMPONENT PARTS WARNING ● Components having special characteristics are marked and must be replaced with parts having specifications equal to those originally installed. ● 印のある部分は、安全確保部品を示しています。部品の交換が必要な場合、パーツリストに記載されている部品を使用し てください。 ABBREVIATIONS IN THIS LIST ARE AS FOLLOWS: C.A.EL.CHP...
  • Page 70 CD-S2100 DIGITAL Ref No. Part No. Description Remarks Markets 部 品 名 ZK183300 P.C.B. DIGITAL PCB DIGITAL ZK183400 P.C.B. DIGITAL UTKALVS PCB DIGITAL ZK183500 P.C.B. DIGITAL PCB DIGITAL ZK183600 P.C.B. DIGITAL PCB DIGITAL CB402 WK469100 CN.FMN FMN 29P TE FMNコネクター CB403 VQ047200 CN.BS.PIN コネクター CB404 VB389800 CN.BS.PIN コネクター...
  • Page 71 CD-S2100 DIGITAL Ref No. Part No. Description Remarks Markets 部 品 名 C471 US064100 C.CE.CHP 0.01uF 50V B チップセラコン C472 US035100 C.CE.CHP 0.1uF 16V B チップセラコン C474 WC666800 C.CE.CHP チップセラコン * C476-477 VN510900 C.EL.BP 3.3uF 50V BP バイポーラケミコン C478 US061100 C.CE.CHP 10pF 50V B チップセラコン...
  • Page 72 CD-S2100 DIGITAL Ref No. Part No. Description Remarks Markets 部 品 名 C581 UR238100 C.EL 100uF JUTKALVS ケミコン C581 UU238100 C.EL 100uF ケミコン C582 US063100 C.CE.CHP 1000pF 50V B チップセラコン C583 US064100 C.CE.CHP 0.01uF 50V B チップセラコン C588-591 WG251600 C.CE.CHP 4.7uF 6.3V チップセラコン...
  • Page 73 CD-S2100 DIGITAL and AUDIO Ref No. Part No. Description Remarks Markets 部 品 名 IC424 YC213A00 IC PCM9210PTR IC IC430 X8897A00 IC R1172S331B-E2-F 電源IC IC438 X5482A00 IC NE5532DR OP AMP アンプIC IC441 X9293A00 IC R1172H151D-T1-FE 電源IC * IC444 X8529A00 IC TC7WZ08FK(TE85L,F) ロジックIC...
  • Page 74 CD-S2100 AUDIO Ref No. Part No. Description Remarks Markets 部 品 名 C159-162 UU257470 C.EL 47uF ケミコン C165-168 UU257470 C.EL 47uF ケミコン C171-176 ZH576000 C.EL 470uF ケミコン C177-186 WE101700 C.PP 1000pF 100V J PPコン C189 US063100 C.CE.CHP 1000pF 50V B チップセラコン C195 US135100 C.CE.CHP...
  • Page 75 CD-S2100 AUDIO Ref No. Part No. Description Remarks Markets 部 品 名 V7421700 TR.CHP 2SC3324-GR,BL チップトランジスタ V7421800 TR 2SA1312-GR,BL トランジスタ V7421700 TR.CHP 2SC3324-GR,BL チップトランジスタ ZD255900 TR 2SCR513P トランジスタ ZD255800 TR 2SAR513P トランジスタ ZD255900 TR 2SCR513P トランジスタ ZD255800 TR 2SAR513P トランジスタ ZD255900 TR 2SCR513P トランジスタ...
  • Page 76 CD-S2100 AUDIO and FRONT Ref No. Part No. Description Remarks Markets 部 品 名 R338-339 WW862100 R.CAR.FP 10Ω 1/4W 不燃化カーボン抵抗 R340 V8070700 R.MTL.FLM 47Ω 金属被膜抵抗 R349-350 Vi197400 R.MTL.CHP 10KΩ 1/10W チップ金属被膜抵抗 R369 WQ072200 R.MTL.OXD 1Ω 酸化金属被膜抵抗 ST1-2 WG095100 SCR.TERM スクリューターミナル TE301 ZF084200 TERMINAL 6P E01 端子台...
  • Page 77 CD-S2100 FRONT Ref No. Part No. Description Remarks Markets 部 品 名 C959 US135100 C.CE.CHP 0.1uF チップセラコン C960-962 US062100 C.CE.CHP 100pF 50V B チップセラコン C967 US064100 C.CE.CHP 0.01uF 50V B チップセラコン C971 US065100 C.CE.CHP 0.1uF 50V B チップセラコン C972 WG888300 C.CE.M.CHP 10uF 6.3V...
  • Page 78 CD-S2100 FRONT Ref No. Part No. Description Remarks Markets 部 品 名 JK903 ZC646900 JACK.DIN 1P JY-5040-040 DINジャック Q901 WB228800 TR KTC3198 Y AT トランジスタ Q902 WB228700 TR KTA1266 Y AT トランジスタ Q903 WW782300 TR.DGT DTC044EUBTL デジタルトランジスタ Q904 VV556400 TR 2SC2412K Q,R,S トランジスタ...
  • Page 79 CD-S2100 Carbon Resistors Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No. 1.0 Ω HJ35 3100 HF85 3100 11 kΩ HF45 7110 HF45 7110 ✻ 1.8 Ω 3180 12 kΩ 7120...
  • Page 80 CD-S2100 1 (1) • OVERALL ASSEMBLY Loader mechanism unit 1 (8) 6-1-L 6-1-R 4-23 4-22 1 (6) 4-18 4-23 4-32 4-15 4-34 4-14 1 (3) 4-13 4-34 1 (4) 4-15 4-13 4-11 4-13 4-15 300-1...
  • Page 81 CD-S2100 Ref No. Part No. Description Remarks Markets 部 品 名 Ref No. Part No. Description Remarks Markets 部 品 名 ZK182000 P.C.B. ASSEMBLY FRONT PCB FRONT WK858600 WASHER SIDE PANEL ワッシャー ZK182100 P.C.B. ASSEMBLY FRONT PCB FRONT WM026900 WASHER SIDE PANEL BL, BP, SP ワッシャー...
  • Page 82 CD-S2100 • LOADER MECHANISM UNIT Ref No. Part No. Description Remarks Markets 部 品 名 5-32 5-33 ZK182000 P.C.B. ASSEMBLY FRONT PCB FRONT ZK182100 P.C.B. ASSEMBLY FRONT PCB FRONT 5-20 ZK182200 P.C.B. ASSEMBLY FRONT TKAL PCB FRONT ZK182300 P.C.B. ASSEMBLY FRONT PCB FRONT ZK182400 P.C.B. ASSEMBLY FRONT PCB FRONT...
  • Page 83: Remote Control

    CD-S2100 ■ REMOTE CONTROL SCHEMATIC DIAGRAM PANEL KEY NO. LAYOUT KEY CODE Mode-1 Option Key Name Customer Data code code 10 ohms 2AD4 5.1K ohms OPEN/CLOSE SOURCE DIMMER REPEAT 22K ohms 22K ohms M34286G2GP 47 uF 1 ohm 1/4W OPEN/...
  • Page 84 CD-S2100 MEMO MEMO...
  • Page 85 CD-S2100 MEMO...
  • Page 86 CD-S2100...

Table of Contents