How To Change The Terminal Id - Furuno FM-8900S Operator's Manual

6. REMOTE HANDSET
2. Press the  or  key to select [INTERCOM] then press
the ENTER key.
3. Press the  or  key to select the called party's terminal
then press the ENTER key.
The called party's terminal and yours ring.
To cancel calling, press the CANCEL key.
4. When the called party answers your call, the screen as
shown in the right figure appears. Start communications.
Note: You do not have to press the PTT switch during
communication.
5. Hang up the handset or press the CANCEL or the CH16
key to turn the intercom off. The RT screen appears.
Answering
1. The terminal rings and the following screen appears. To cancel reply, press the
CANCEL key.
2. Press the ENTER key with off hook condition or pick up the handset with on hook
condition to start communications.
3. Hang up the handset or press the CANCEL key to turn the intercom off. The RT
screen appears.
Earpiece volume
You can adjust the volume of the earpiece during intercom communication by pressing
the  or  key. After intercom communication, the earpiece volume is reverted to the
setting value you set on [EARPIECE LEVEL] (see section 6.11).
Note: Neither key click nor key error sounds during intercom communication.
6.10

How to Change the Terminal ID

1. Turn off the remote handset by the transceiver unit.
2. While you hold the MENU key, turn on the remote handset by the transceiver unit.
The setting window for terminal ID appears.
3. Enter the terminal ID, using the 1 to 6 keys, then press the ENTER key. Do not
assign the same number to multiple remote stations.
Note: Restart the remote handset by the transceiver unit after changing terminal ID.
6-6
Off hook condition On hook condition