Dodge RAM 1500 1998 Owner's Manual page 1283

9 - 60 ENGINE - 3.7L
FRONT MOUNT (Continued)
1 - RH INSULATOR TO AXLE BOLT
2 - NUT
3 - PINION SUPPORT MOUNT
4 - LH INSULATOR MOUNT
(6) Loose assemble the lower through bolts.
(7) Torque the nuts for the (4) through bolts to 101
N·m (75 ft. lbs.).
(8) Torque the (3) bolts that attach the front axle
to the left engine bracket to 101 N·m (75 ft. lbs.).
(9) Install the oil drain trough.
(10) Install the engine oil filter.
Fig. 69 ENGINE INSULATOR MOUNTS 4X4
5 - LH INSULATOR TO AXLE BOLT
6 - FRONT AXLE
7 - NUT
8 - RH INSULATOR MOUNT
(11) Install the front crossmember.
(12) Install the skid plate.
(13) Lower the vehicle.
(14) Install the viscous fan (Refer to 7 - COOL-
ING/ENGINE/FAN DRIVE VISCOUS CLUTCH -
REMOVAL).
(15) Reconnect the negative battery cable.
DR