Table of Contents
Advertisement
Installation
Unpacking Cooktop
• Remove all packing and printed material packed
with cooktop.
• Slide cooktop out of box.
• Remove grates, burner bowls, and pressure
regulator from box.
• To avoid damage, do not slide cooktop across
countertop.
Countertop Cutout and Clearances
Prepare countertop opening according to dimensions
shown in diagrams. Area beneath cooktop must be
accessible for adjustment of gas pressure regulator
unless pressure regulator is mounted in burner box.
Minimum Cabinet Requirements
• 24 inches minimum width base cabinet is required
for single cooktop installation.
Cooktop Dimensions
Cutout Dimensions
Use single cutout for 1 cooktop and 2 cutouts for
cooktops placed side by side.
20"
15"
3" Min.
Minimum Requirement for Cooktops Placed Side-by-Side
• 2 inches must separate cutout of each cooktop.
• 1 inch must separate side flanges of each cooktop.
3 1/4" Min.
2" Min.
4
Minimum Clearances to Combustible Material
• 2 ¾ inches from cooktop to rear wall.
• 7 ¼ inches to side walls.
Minimum Requirement Below Cooktop
• 3½ inches from top of countertop to drawer or other
obstruction under countertop.
• With pressure regulator, allow for addition
clearance below cooktop depending
on gas connection.
Side View
1 1/2"
Pressure Regulator
2 1/2"
14 1/2"
Front View
Pressure Regulator
19 1/2"
3 1/2"
2 1/2"
Advertisement
Table of Contents
