4. Do one of the following:
– Scroll to Enable to enable the DHCP client.
Press
A check mark appears next to the selected
option.
– Scroll to Disable to disable the DHCP client.
Press
a. Press
b. Press
Performing Static Settings
This section provides instructions for performing the
static settings.
70
to confirm the change.
to enter the Disable menu.
or
Then press
A check mark appears next to the
selected option.
or
Then press
Settings menu. See the "Performing
Static Settings" section on page 70 for
information about performing static
settings.
to scroll to Activate.
.
to scroll to Static Settings.
to enter the Static
78-14564-01