Setting Ip Address; Setting Ip Address For The Subnet Mask - Cisco 7920 User Manual

Setting IP Address

1. Follow Step 1 to Step 3 in "Setting Up the
Dynamic Host Configuration Protocol Client"
section on page 68.
2. Scroll to Disable to disable the DHCP client.
3. Press
press
4. Press
press
5. Press
numeric keys to enter the IP address. Press
to delete the number last entered when editing.
6. Press
editing the IP address.
7. Press

Setting IP Address for the Subnet Mask

1. Follow Step 1 to Step 3 in "Setting Up the
Dynamic Host Configuration Protocol Client"
section on page 68.
2. Scroll to Disable to disable the DHCP client.
3. Press
press
4. Press
press
Cisco Wireless IP Phone 7920 User Guide
or to scroll to Static Settings. Then
to enter the Static Settings menu.
or to scroll to IP address. Then
.
to enter the edit mode. Use the
when you have finished entering or
to return to the Static Settings menu.
or to scroll to Static Settings. Then
to enter the Static Settings menu.
or to scroll to Subnet Mask. Then
.
Network Configuration
71