Table of Contents
Advertisement
22
Chapter 2 Unpacking and setting up the switch
Installing the switch
When choosing a place to install the 1424T switch, use the following guidelines:
•
Ensure that the surface supports at least 3 kg
•
Ensure that the power outlet is within 1.82 meters (6 feet) of the device
•
Visually inspect the power cord to see that it is plugged in to the AC power
connector
Installing the switch on a desktop or shelf
When installing the 1424T switch on a desktop or shelf:
1
Attach the rubber feet included with the device to the bottom of each corner
(Figure
2
Be sure to allow adequate space for ventilation between the device and the
objects around it.
Figure 2 Rubber feet attachment points
Installing the switch in a rack
You can install the 1424T switch in a standard 19-inch electronic equipment rack
or cabinet. Along with the required screws, two mounting brackets are included in
the switch's packaging.
316867-A Rev 00
2).
Advertisement
Table of Contents
