Canon IR 2420 Network Manual page 75

● If you want to set the port number for HTTP:
Port Number Settings
HTTP
3
● If you want to set the port number for SNMP:
Port Number Settings
SNMP
15
Press
16
Restart the machine.
Turn OFF the machine, wait at least 10 seconds, and then turn it ON.
NOTE
For instructions on how to turn the machine ON and OFF, see Chapter 1, "Before You
Start Using This Machine," in the Reference Guide.
3-8
Setting Up the Machine Using the Control Panel
LPD
RAW
HTTP
SNMP
80
(0-65535)
LPD
RAW
HTTP
SNMP
161
(0-65535)
(Reset) to return to the Standby display.
❑
Use [ ] or [ ] to select <HTTP> ➞ press
[OK].
❑
Enter the port number using [ ] or [ ], or
(numeric keys) ➞ press [OK].
-
NOTE
If the port number is changed from the
default '80', you must specify the
changed port number when entering the
URL to access the Remote UI.
❑
Use [ ] or [ ] to select <SNMP> ➞ press
[OK].
❑
Enter the port number using [ ] or [ ], or
(numeric keys) ➞ press [OK].
-