Setting Up The Machine Using The Control Panel; Protocol Settings - Canon IR 2420 Network Manual

Setting Up the Machine Using the Control Panel

You can specify the machine's protocol settings using either the machine's control
panel or the Remote User Interface (UI). Specify the settings using the easier
method.
IMPORTANT
The Remote UI requires a web browser. For details about supported web browsers, see
3
Chapter 1, "Using the Remote UI," in the Remote UI Guide.
NOTE
If you change the IP address, etc. on the web browser (Remote UI), the change is not
reflected in the setting display. To verify on the machine, access <Network Information>
using [System Monitor] (see "Checking the Current Network Settings," on p. 2-36), or
print a User's Data List (see Chapter 3, "Useful Functions and Settings," in the Reference
Guide).

Protocol Settings

Follow the procedure below to enable protocols required for your network.
IMPORTANT
Be sure to restart the machine after you have changed any of its network settings.
Settings that have been changed from the control panel become effective after the
machine is restarted.
1
Press
2
Additional Functions
3-2

Setting Up the Machine Using the Control Panel

(Additional Functions).
Timer Settings
Adjustment/Cleaning
Report Settings
System Settings
Use [ ] or [ ] to select
<System Settings> ➞ press [OK].