3
Network Settings
TCP/IP Settings
SNMP Settings
Ethernet Driver
Startup Time Set.
4
TCP/IP Settings
RAW Print Settings
Use HTTP
Port Number Settings
RX MAC Address Set.
5
Select whether or not to use the MAC address filter.
● If you want to enable the MAC address filter:
RX MAC Address Set.
Off
On
Settings
● If you want to disable the MAC address filter:
RX MAC Address Set.
Off
On
Settings
Use [
] or [
] to select
<TCP/IP Settings> ➞ press [OK].
Use [
] or [
] to select
<RX MAC Address Set.> ➞ press
[OK].
❑
Use [ ] or [ ] to select <On> ➞ press
[OK].
IMPORTANT
If 'On' is selected, the machine can be
accessed only from MAC addresses that
will be specified in step 10. Be sure to
have the correct MAC addresses with you
before specifying them on the machine. If
an incorrect MAC address is entered, you
will be unable to access the machine via
the network.
❑
Proceed to step 6.
❑
Use [ ] or [ ] to select <Off> ➞ press
[OK].
❑
Proceed to step 11.
Access Control
2
2-47