Cleaning And Caring For Your Vehicle; Vertical Aim Adjustment; Washing Your Vehicle - Lincoln LS 2000 Owner's Manual

Maintenance and care

Vertical aim adjustment

1. Park the vehicle on a level
surface.
2. With the hood open, remove
protective cover, then locate the
bubble level and the vertical
adjustment screw.
3. The numbers shown on the vial
indicate the directional change (up
or down) of the vertical aim.
4. Use a 4 mm wrench or socket to
turn the vertical adjusting screw
until the bubble is below the "0"
mark position when viewed directly
from above.
5. Install protective cover.
When the horizontal and vertical indicators are set to the "0" mark, the
headlamp has been properly aimed.

CLEANING AND CARING FOR YOUR VEHICLE

Refer to the Customer Assistance chapter for a list of Ford-approved
cleaners, polishes and waxes.

Washing your vehicle

Wash your vehicle regularly with
cold or lukewarm water. Never use
strong detergents or soap. If your
vehicle is particularly dirty, use a
quality car wash detergent. Always
use a clean sponge, washing glove
or similar device and plenty of water
for best results. To avoid spots,
avoid washing when the hood is still
warm, immediately after or during
exposure to strong sunlight.
241