Charging The Battery - SENDO X Quick Start Manual

If you need to remove the battery, ensure
your phone is switched off, pull the small
tab at the bottom of the phone and lift the
battery out.
4 Replace the cover. Place the cover onto
the back of the phone and slide the cover
into place making sure the tabs click into
place.

Charging the battery

You must charge the battery for at least 4
hours before you use the phone for the first
time. After this, the battery will normally take
around 2 to 3 hours to charge.
1 Insert the connector on the charger lead
into the connector at the base of the
phone.
2 Plug the charger into a mains AC socket.
When charging commences, the battery
icon on the phone's screen will
become animated. When the battery is
fully charged, the battery full icon
appear and you can disconnect the
charger.
z
Warning: To ensure that the battery icon
is accurate, you need to make sure you
do a full charge and discharge when
you use any battery for the first time.
While your phone is charging, you can take
the opportunity to install the software
contained on the Companion CD, on your
PC.
3
2
will