Table of Contents
Advertisement
Sendo SAR Statement (Global)
THIS MOBILE PHONE MEETS REQUIREMENTS
FOR EXPOSURE TO RADIO FREQUENCY
ENERGY.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the limits for exposure to radio frequency
(RF) recommended by international guidelines.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through
periodic and thorough evaluation of scientific
studies. The guidelines include a substantial safety
margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs
a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit
recommended by international guidelines is 2.0
Watts/kg*. Tests for SAR are conducted using
standard operating positions with the phone
transmitting at its highest operating power level.
Although the SAR is determined at the highest
operating power level, the actual SAR of the phone
while operating normally can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to communicate with
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
The highest SAR value for the Sendo X phone when
tested for use at the ear is 0.483 W/kg.
Always read and follow the operating and safety
instructions that came with your phone.
* The SAR limit for mobile phones used by the
public is 2.0 Watts/Kg (W/kg) averaged over ten
grams of body tissue. The guidelines incorporate a
substantial margin of safety to give additional
protection for the public and to account for any
variations in measurements.
Regulatory Compliance
Your phone has been designed to comply with
applicable standards when used correctly in
accordance with the user instructions. Sendo GSM
900/1800/1900 phones and accessories have been
tested and certified for compliance with the
following EC Directives, FCC and international
standards, as applicable:
European (EC) Directives
1999/5/EC (R&TTED)
89/336/EEC (EMCD)
73/23/EEC (LVD), as amended by 93/68/EEC
FCC (USA) Standards
FCC Part 24 (47CFR): 2002 -
Sections: 24.232; 24.235; 24.238
FCC Part 15 (47CFR): 2001 Class B -
Sections: 15.31; 15.33; 15.105; 15.107; 15.109;
15.203; 15.204; 15.207; 15.209; 15.247; 15.249
FCC Part 2 (47CFR): 2001 -
Sections: 2.1046; 2.1049; 2.1051; 2.1053; 2.1055
International Standards
IEC/UL/AS-NZ/BS EN60950 (Electrical Safety)
CSA C22.2 No 60950-00:2000,
3rd Edition (Canada electrical safety)
EN301 489-7 (GSM EMC)
EN301 489-1 (EMC)
EN301 489-17 (2.4GHz EMC)
EN300 328-2 (2.4GHz RF)
EN301 511 (GSM900/DCS1800)
33
8
Advertisement
Table of Contents
