Adjusting Audio Recording Level - JVC JY-HM360AG Instructions Manual

Setting Input Channel to [INPUT1]/[INPUT2]
Select the audio to input to [INPUT1] and [INPUT2]
terminals with the [INPUT1]/[INPUT2] mode
switch.
Setting
[LINE] Use this setting when connecting to
an audio device or other equipment.
The reference input level is +4 dBu.
[MIC] Use this setting when connecting to
a dynamic microphone.
[MIC+48V] Use this setting when connecting to
a microphone (phantom
microphone) that requires a +48 V
power supply.
Memo :
When "MIC" or "MIC+48V" is selected, set the
0
reference input level in [Main Menu] B [A/V
Set] B [Audio Set] B [Input1 Mic Ref.]/[Input2
Mic Ref.].
(A P99 [ Input1 Mic Ref. ] )
(A P99 [ Input2 Mic Ref. ] )
Caution :
When connecting a device that does not require
0
a +48 V power supply, make sure that it is not
set to the "MIC+48V" position.
When the [INPUT1]/[INPUT2] mode switch is
0
set to "MIC", make sure that a microphone is
connected to the [INPUT1]/[INPUT2] terminal. If
you increase the recording level when a
microphone is not connected, noise from the
input terminal may be recorded.
When a microphone is not connected to the
0
[INPUT1]/[INPUT2] terminal, set the [INPUT1]/
[INPUT2] mode switch to "LINE" or adjust the
volume with the [CH1]/[CH2] recording level
adjustment knob.
56
Audio Recording
Description

Adjusting Audio Recording Level

You can select to adjust the audio recording levels
for the two channels (CH1/CH2) manually or
automatically.
CH1 CH2
INT
INPUT1
INPUT2
LC
AUTO
MANUAL
CH1 CH2
.
Manual Adjustment Mode (Manual
Adjustment)
Set the [CH1/CH2 AUTO/MANUAL] switch on
0
the camera recorder to "MANUAL" to enter the
manual adjustment mode, and use the [CH1]/
[CH2] recording level adjustment knob to set the
recording level.
You can adjust the level manually during the
0
recording, recording standby, and stop modes.
o When the input channel is set to "INPUT1"/
"INPUT2"
1 Set the [CH1/CH2 AUTO/MANUAL]
selection switch to "MANUAL" for the
channel to be adjusted manually.
2 Turn the corresponding [CH1]/[CH2]
recording level adjustment knob to adjust
the level.
When [Audio Set] B [Limiter] is set to "Off",
adjust such that the audio level meter does not
light up at -2 dB even for loud sounds.
(A P99 [ Limiter ] )
4030 20 10 0
P 13000K
4030 20 10
.
FULL AUTO
ON
OFF
00: 00: 00.00
Jan 12,2016
12 :34 :56
5 . 6f t
AE 6
+
0
dB
F1. 6
1/ 100
0
-2dB