Installation Requirements; Installation Environment - Oki C542 User Manual

Installation Requirements

• Installation Environment

• Installation Space
Installation Environment
Install the machine in the following environment.
Ambient temperature: 10°C to 32°C
Ambient humidity: 20% to 80% RH (relative humidity)
Maximum wet bulb temperature: 25°C
• Use care to prevent condensation. It may cause a malfunction.
• If installing your machine where the ambient humidity is 30% RH or below, use a humidifier or antistatic mat.
• Depending on the installation environment, the operation noise may be louder. If the noise bothers you, we suggest
you to install the machine in the place away from you or in another room.
Do not install this machine in a location where temperature becomes high or near
•
open flames.
Do not install this machine in a location where chemical reactions may occur (such as
•
a laboratory).
Do not install this machine near alcohol, thinners, or other flammable solvents.
•
Do not install this machine in a location within the reach of children.
•
Do not install this machine in an unstable location (such as on an unsteady stand or
•
slanted location).
Do not install this machine in a location with high level of humidity or dust, or in a
•
location where the machine is exposed to direct sunlight.
Do not install this machine in an environment where it is exposed to salty air or
•
corrosive gas.
Do not install this machine in a location where it is exposed to a high level of vibration.
•
Do not install this machine in a location where its vent hole is blocked.
•
- 14 -
2. Setting Up