Adjusting The Signal Levels Of The Output Audio Outputs - Sennheiser HE 1 User Manual

Using the HE 1 | Adjusting the signal levels of the OUTPUT audio outputs
36
Adjusting the signal levels of the OUTPUT audio
outputs
You can increase or reduce the audio output level depending on the power am-
plifier or the active loudspeakers used. Thus, the complete adjustment range
of the HE 1 volume control is maintained and perfectly adjusted to the devices
used.
1. Make sure that the signal levels of the INPUT audio inputs are correctly
adjusted (see page 33).
2. Set the OUTPUT rotary switch to
3. Adjust the volume on the HE 1 to a medium level that is comfortable for
you and suitable for your power amplifier or the active loudspeakers used.
This volume level becomes the reference level for the center position of the
volume control.
4. Press and hold the PHONES
control for 2 seconds.
The status LED flashes green. The signal level for the audio inputs is stored.
The volume control automatically returns to the center position so that you
can use the complete volume range.
1
Input
I
I
3
3
LINE and start playback.
button and the LINE button on the remote
2
2
Output
4
4
INPUT
OPTICAL USB
UNBALANCED
CROSS FEED
OFF LOW
OUTPUT
PHONES
2 s
COAXIAL
BALANCED
HIGH
LINE