Connecting The Tube Headphone Amplifier To Audio Sources - Sennheiser HE 1 User Manual

Putting the HE 1 into operation | Connecting the tube headphone amplifier to audio sources
14
There must be sufficient room in front of and above the amplifier as the
▷
operating elements and the amplifier tubes extend automatically and the
glass cover opens automatically (see diagram).
Observe the range of the remote control (see diagram).
▷
Connecting the tube headphone amplifier to audio
sources
You can connect several audio sources to the tube headphone amplifier and
switch between these connected sources using the
Switch your audio sources off before connecting the tube headphone
▷
amplifier.
Select a suitable high-quality connection cable for your audio source. Please
▷
observe the recommended maximum cable length as given in the table.
To connect the tube headphone amplifier to your audio source, refer to the
▷
connection diagram suitable for your your audio source (see the following
chapters):
Connection possibilities of the
audio source
XLR-3 (BAL)
A
RCA (UNBAL)
B
USB (USB)
C
Optical (OPT)
D
Coaxial (COAX)
E
INPUT rotary switch.
Connection cable Max. cable
length
2 balanced XLR-3
10 m
cables
Stereo audio cable
with 2 RCA connec- 3 m
tors at each end
USB 2.0 certified
cable with Type A and 5 m
Type B connector
Optical cable 5 m
Coaxial cable (75 ) 5 m
Page
15
15
16
16
16