Preparing For Use; Baby Unit; Parent Unit - Philips AVENT SCD620 User Manual

8
English

Preparing for use

Baby unit

Parent unit

- All required markings on the baby unit, parent unit and power adapter
are located on the bottom of the baby unit, parent unit and power
adapter.
Compliance with standards
- This product complies with the radio interference requirements of the
European Community.
- Philips Consumer Lifestyle hereby declares that this baby monitor is in
compliance with the essential requirements and other relevant provisions
of Directive 1999/5/EC. A copy of the EC Declaration of Conformity
(DoC) is available online at www.philips.com/support.
Electromagnetic fields (EMF)
- This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
Put the power adapter in the baby unit and the adapter in the wall socket.
The parent unit runs on a built-in rechargeable Li-ion battery.
Follow the below steps to charge the parent unit:
1 Put the power adapter in the parent unit and put the adapter in the wall
socket.
-
The battery status light turns orange to indicate that the appliance is
charging.
-
When the battery is fully charged, the battery status light lights up
green continuously.