Truncate - Monroe Ultimate User Manual

Monro-Manual-1-50
Truncate (round down)
SWITCH SETTINGS
ENTER
1.444
2.687
60
1/26/10 6:07 PM Page 60
+ F 0 1 2 3 4 6
DEPRESS
I I I
PRINT OPERATIONAL NOTES
Truncate or Round Down
instructs the calculator
to ignore all values past
,
1.444 +
1.444C+ the decimal setting when
calculating a result or finding
2.687 + a total. Were this example
performed with the decimal
4.13 selector at F, the total would
be 4.136. With truncate, the
decimal digit 6 is ignored or
truncated. Note: Truncate
does not ignore decimal digits
entered (1.444 for example). It
Special Note: The default Special Note: The default
position for the 8125 is position for the Ultimate is
automatic rounding commonly automatic rounding commonly
referred to as 5/4. In the default
position, any decimal digit past
position, any decimal digit past
the decimal setting is reviewed.
the decimal setting is reviewed.
If it is 5 or greater the decimal
If it is 5 or greater the decimal
digit to its left is rounded up. If
digit to its left is rounded up. If
it is 4 or less, the decimal digit
it is 4 or less, the decimal digit
to the left is unaffected.
to the left is unaffected.