Slide Switches - Monroe Ultimate User Manual

Monro-Manual-1-50
Slide
Switches
DECIMAL SELECTOR SWITCH
Allows selection of up to nine decimal settings
+, F, 0, 1, 2, 3, 4, 6. For example, when set +, F, 0, 1, 2, 3, 4, 5, 6. For example, when set
at 2, all totals and results will contain two
or displayed. In Floating (F) decimal setting,
results are expressed at maximum decimal
accuracy. When working with dollars and
cents, the Decimal Selector can be set at Add
Mode (+), eliminating the need to enter the
decimal point.
D/PD/N SELECTOR SWITCH
D/N/PD TIME SELECTOR SWITCH
Allows the Ultimate to be operated in Display only
Allows the 8125 to be operated in Display only
mode (d position), Print and Display mode (pd),
mode (d position), Print and Display mode (pd)
Print and Display mode with n count (n) or time.
or Print and Display mode with n count (n).
In the time position, the Ultimate assumes entries
are hours and minutes and operates in time clock
TC/ /GT SELECTOR SWITCH
mode.
This switch allows three choices. The tc
position stands for "two column". The
TC/I /GT SELECTOR SWITCH
This switch allows three choices. The tc
position stands for "group and grand total".
position stands for "two column". The I
position is the neutral/off position, and the gt
TIME/CALC SELECTOR SWITCH
position stands for "group and grand total".
This switch allows two choices. In the time
position, the 8125 assumes entries are hours
and minutes and operates in time clock
mode. In the calc position, the 8125 operates
normally.
18
1/26/10 6:07 PM Page 18
+ F 0 1 2 3 4 6
I I I